A Family Run Business Since 1980

(416) 879-2050

I want to start with requiring temperature and water heater setting, as it is very important for the safety of you and your family.

Most dishwashers come with heating systems or elements which raise the temperature to about ONE HUNDRED AND FORTY de­grees Fahrenheit.
On the other hand, a few specific types of dishwashers do not have a heating enhancer and will require the household water heater to be set at roughly ONE HUNDRED AND FORTY degrees Fahrenheit.
Therefore, the first thing is to read the user’s guidebook for the ideal water heater setup.

For sure the energy efficiency and staying away from unintentional scalding, is very important to every homeowner, therefore.

We recommend you to set the water heater temperature to ONE HUNDRED TWENTY degrees Fahrenheit.

And if your water heater does not have a temperature control valve, then you might need to install one by the help of a licensed plumber.

And now let’s head over to the details on how a dishwasher works.

A dishwasher and a cloth washer filling up with the water in entirely different ways.

The lower part of a dishwasher is called a tub, and it fills with two to three gallons of warm water, and at the same time it blends with the detergents,
and then the pump will pump it up by making use of the spinning spray arms on top of the dishes.

The water used for the washing drains, and it fills again with the clean water to rinse out the dishes.

The action will continue for a few times.

The water volume regulates by a timer.

And the water temperature level will increase about ONE HUNDRED AND FORTY to ONE HUNDRED SIXTY degrees Fahrenheit by a heating element close to the bottom.

When the rinse and washing periods are over, then. The same element helps to dry out the dishes.

Verify the temperature of your hot-water tank at its configuring, In case if your dishwasher needs to have a temperature of ONE HUNDRED AND FORTY degree water.

Place ther­mometer in a cup and fill it up with the water at its hottest position using the kitchen faucet.
If the temperature displays below ONE HUNDRED AND FORTY de­grees, you need to either increase the water heater temperature which we do not recommend,

or buy another type of dish­washer.

However, first, check the points mentioned below.

How a washing machine works.

The cloth washer tub that you load up with your clothes contains many tiny holes.
The openings or holes enable water to pass to an external tub, which keeps the water.
In top­ loading machines, generally, an agitator is in the midsection.
An agitator rotates continuously and it rotates counterclockwise and clockwise about three-fifths or three-fourths of a spin to wash the clothes by crashing and plunging all of them and rubbing the clothes together.

However, the front-loaded machines don’t have agitators.
As a replacement, the drum spins horizontally similar to your dryer.
And then the clothes will be forced throughout the water in the drum for the cleaning process.
More clothes can be placed in front loading machines, and at the same time, it has a much easier washing process on the clothes.

Washing machine’s Fill valve or water inlet valve:
The fill valve or a water inlet valve is a small device which is responsible for feeding the cold and hot water inside the machine.
In some of the modern machines, the fill or inlet valve might be large.
It might include several more connections for the hoses and also more solenoids to run the water to soap dispensers and fabric and bleach softeners.

The fill valve contains three main parts:
solenoid for the cold water, a solenoid for the hot water and a mixing valve.

And the valve comes with three connections for the hoses:
a hose for the cold water, a hose for the hot water, and a fill hose to feed the mixed water to the tub.

The electricity passes to both solenoids or just one of them, then the water streams from the valve to the washing machine’s tub.
And the water stops as soon as the electricity stops.

Dishwasher’s pump and motor:

Running and spinning of the tub and agitator plus drying and cycling are the motor’s job.
And the pump drains the water after a wash is complete.
There is always a limit for the pump that how far out of the machine can pump the water, also the amount of the water can be a limit.

Some newer motors can work back and forth, we call them reversing or two-direction motor, and it has different speed adjustment that might not be available with the older versions.

The dishwasher’s motor coupler and belt:

Some of the washers work with a coupler for connecting the transmission to the motor.
And a dishwasher has either a  rubber coupler or a rubber belt.

Some washers working with belts.
The belt is for the connection of transmission to the motor or pump.
The belt is also made of rubber, and it’s often TWENTY-THREE to THIRTY-ONE inches in a loop.

The Timer and switches:
Some of the timer switches are digital and possible to read, or it can be identical to a regular clock.
The washing machine runs with a prefixed timer.

The switches are on the control panel, for the use of  rotation speed, adjusting the temperature of water and other changeable settings.

Plumbing Services

 (416) 879-2050